The Grid is used to align Guide Tubes for a straight and accurate penetration. Holes are 1 mm apart in a rectangular array within a 19 mm diameter. Accurate alignment is accomplished by 1 cm long guide holes. A Spacer is recommended to bring the Guide Tube Top (flared end) near the top of the Grid Cup. The Offset Grid is identical except the holes are offset .5 mm in one direction in the array. The direction of the offset is indicated by a missing hole near the perimeter of the grid. When used in conjunction with the Standard Grid (6-YGD-D1) it provides three times as many penetration points when the offset is rotated 90 degrees.

 

  • 6-YGD-D1
    6-ygd-d1
    Grid, Standard w/ Pattern 1 mm o.c.
    19 mm diameter x 40 mm tall
    Delrin
  • 6-YGD-D2
    6-ygd-d2
    Grid, Offset, w/ Pattern 1 mm o.c. offset .5 mm
    19 mm x 40 mm tall
    Delrin
  • 6-YGD-D1A
    6-ygd-d1A
    Grid, Short Version w/ Standard Pattern
    19 mm Dia x 19.5 mm tall
    Delrin
  • 6-YGD-D2A
    6-ygd-d2A
    Grid, Short Version w/ Offset Pattern
    19 mm Dia x 19.5 mm tall
    Delrin
  • 6-YGD-D1-DM
    6-ygd-d1dm
    Grid, w/ dye Markers,
    4 markers at 90 degree intervals
    Delrin
  • 6-YGD-J1
    6-ygd-j1
    Grid, Standard w/ Pattern 1 mm o.c.
    19 mm x 40 mm tall
    CILUX
  • 6-YGD-J2
    6-ygd-j2
    Grid, Standard w/ Pattern 1mm o.c. offset .5mm
    19 mm x 40 mm tall
    CILUX
  • 6-YGD-J1A
    6-ygd-j1A
    Grid, Short Version w/ Standard Pattern
    19 mm Dia x 19.5 mm tall
    CILUX
  • 6-YGD-J2A
    6-ygd-j2A
    Grid, Short Version w/ Offset Pattern
    19 mm Dia x 19.5 mm tall
    CILUX
  • 6-YGD-BP Grid Base Plate Stainless Steel
    6-ygd-bp
    Plate provides an attachment point for guide tubes and electrodes that are to be implanted for long term chronic studies of a single site. (Cannot be used with Biela Microdrive System.)
    Angeled grids Are available in both Cilux and Delrin in angles from 5 degree to 25 degree in the normal height grid and up to 30 degrees in the short (19.5 mm) height grids
  • 6-YGD-D1-XX
    Custom Angle Grids, up to 10 degrees, the same size and hole pattern as the standard grid
    Delrin
  • 6-YGD-J1-XX
    Custom Angle Grids, up to 10 degrees, the same size and hole pattern as the standard grid
    Cilux
  • 6-YGD-D3
    6-ygd-d3
    Flat Grid
  • Custom Grids
    We can adapt our grid system to most any chamber round, oval, square or rectangular. Also we can drill custom size hole paterns and sizes.